Category Archives: Plumbing

Plumbing services

Regular Furnace Maintenance Reduces Furnace Repairs

Published by:

Did you know that a gas-powered furnace has a lifespan of more than 20 years? An electric furnace can run for much longer. This makes investing in a furnace for space heating in the home sound like a real bargain. The initial installation costs will be almost insignificant compared to the benefits you will enjoy for many years.

There is just one catch: Maintenance. You can’t expect the furnace to continue functioning at its optimum through the years without giving it a second thought. Furnaces are complex pieces of equipment. They need attention if they are to last as long as they ought to. Regular furnace repair kelowna and maintenance is absolutely necessary if you want your furnace to make it past half of the lifespan expected from it.

You should therefore get in touch with a heating repair company in your area and agree on a maintenance schedule. This will ensure that your furnace is well looked after and will therefore last for much longer.

Many people avoid investing in maintenance. They wait for their furnaces to breakdown or exhibit a problem before they get in touch with a furnace repair technician. By this time the damage is extensive and the repair costs will be high. In the end, they spend much more than those who invest in annual/regular maintenance.

Regular Maintenance Helps Prevent Expensive Repairs

Do you want to save money on your furnace? You should invest in annual maintenance for your furnace. Annual checks will result in a reduced need for repair. You will therefore spend less on the total care of your furnace.

Maintenance ensures that your furnace is inspected by a technician at least once a year. The technician can identify problems in their early stages and make the necessary repairs before the problems escalate into expensive repairs. You will therefore spend less on these minor repairs carried out during maintenance.

Maintenance also involves tune-up. The technician will make adjustments that need to be made and clean any parts of the furnace that need to be cleaned or unclogged. They will ensure that all moving parts are well lubricated and unobstructed to prevent them from breaking down, wearing down or burning out. This will prevent malfunctions and breakdowns in the future as well as making your furnace to function optimally.

Additional Savings

Regular furnace maintenance also saves you money on your energy bills. Running a furnace can consume a lot of energy especially when it is overcompensating for one issue or another. It is therefore important to take the time to ensure that your furnace is always in its best working condition. Maintenance will ensure that your furnace is running efficiently. You will therefore enjoy reduced heating bills in the long run.

Perimeter Drains, Your First Line of Defense

Published by:

If you’re looking to build or buy a home, particularly in any area that is damp or prone to basement flooding, one important aspect of your home will be the perimeter drains.

Perimeter drains are basically a drainage ditch covered with gravel for the purpose of directing water away from certain areas like foundations. While French drains used to be constructed using spaced tiles, they are now generally constructed with perforated plastic pipes that can carry larger volumes of water and allow water drainage out the entire length of the pipe as well.

The Job Perimeter Drains Perform

The purpose of perimeter drains Vancouver around your foundation is to draw water that would otherwise sit around the foundation and wick into it, possibly creating one very wet basement or crawl space. A properly built outer perimeter drain should be at a lower level than the footings so that capillary action cannot draw the water up and through the walls.

There is also an interior perimeter drain that can be used that is installed around the inside perimeter of the basement as well. The idea with the interior drain is that unlike the outside perimeter drain, there is no dirt and sediment to plug it up, so that it won’t need to be unclogged after a number of years of use and because it’s inside, any repairs are easily made.

Many of these interior drains are basically just a gap around the perimeter of the basement walls that allow the water to collect from seepage and any humidity to drip down from the concrete wall. The big problem with this type of system is that it creates a lot of moisture inside the home and can cause mildew problems.

The French Drainage System

Interior drains can also be constructed with a new type of French drain system that is installed around the inside perimeter of the basement wall that is then covered with cement. The design allows water to drip down or collect in the pipe through the sides and be pumped away by sump pump while avoiding excessive moisture problems in the home.

The Sump Pump

The water is removed from the basement by way of a sump pump; this pump is wired into the home’s electrical system but should also have a battery backup as well. The sump pump should be maintained yearly to make sure it’s in good running order.

Any information about flooding or the state of the perimeter drainage Vancouver system should be provided to you by the homeowners. The more you know about an existing drainage system, the better prepared you will be in case you need to make any repairs to it once you live in the home; and the more you know about drainage systems in general, the better informed you will be when it comes time to put one in a home you’re building as well.

Common Tools Needed When Working on The Plumbing

Published by:

If you have ever experienced a blocked drain or a leaking pipe, then you understand the importance of a plumber. The services of a plumber will ensure you do not suffer losses in your business or industry due to plumbing problems. Any Vancouver plumber who knows his stuff will be able to assess the issue at hand and identify the source of the problem. He will then fix the problem ensuring that the activities in the business can continue uninterrupted. If you are thinking of tackling the job yourself then here is a list of tools you will need to get the job done right.

There are a wide variety of tasks that a plumber can carry out and there are also specialties in the trade which require additional training.

Importance of Using Proper Tools

A plumber is required to carry out a variety of tasks, from cleaning blocked drains to installing and repairing hot water systems. For each job, a plumber should know the materials and tools that will be required to carry out the job to completion.

A plumber should be able to have some carpentry skills. These skills will be required when he has to access pipes and other fittings that are concealed behind walls or underneath. He also has to carry out some welding, soldering and cementing and therefore has to have the right tools at hand.

Plunger

A plunger is something everyone should have in the bathroom.  It is a very common tool that is required every so often. It is used to unblock toilets, sinks, bath tubs and floor drains. You create a firm seal by pressing the plunger down against the opening of the drain. Once it is pressed down, a vacuum is created which draws up the clog when the plunger is released. The plungers used to unblock toilets are usually the heavy duty strong types with a double suction cup.

Hand Auger

A hand auger is used to clear any blockage in the drain after unsuccessfully using a plunger. It is a long flexible cable made from steel wires that can easily go down the twists and turns of the drain. Once the blockage is reached, a motor is turned on and the clog is broken down into small particles. The small particles are thus able to flow down the drain. A closet auger works the same way as a hand auger only that the plumber has to manually turn it to break the clog into small particles. You can rent one of these tools from most supply shops that rent tools.

Pipe Wrench

The pipe wrench is a heavy, large tool which is used to loosen or tighten nuts and fittings. This tool has strong teeth which are used to firmly grip the fittings. You half to be careful not to ruin the finishing on the fittings when using this tool. You can do this by using a rug on the jaws before using the wrench on the fittings. Normally, a plumber uses one wrench to grip the item while the other one is used to turn it.

Hacksaws and Cutters

The hacksaw is used to cut plastic and metal pipes, bolts and nuts and other hard material. If the cut is a difficult one, the blade has to be tensed up in the blade.

A tubing cutter on the other hand is used to cut through pipes which are made from copper. The cutter comes in different sizes including the standard size and the mini-cutter which is used to cut pipes that are located in a small space.